Skip to main content
Equipment Cat 301.8

Cat 301.8

Mini-Excavators

  • Koormust tundev hüdraulika võimaldab lühimaid töötsükleid
  • Võrratu salongimugavus parima võimaliku ülevaatega
  • Enneolematu juurdepääs hoolduseks ja teeninduseks
  • Vastupidav ehitus ja kõrge edasimüügiväärtus
  • Maksimaalne materjalikäsitlus väikese ruumivajadusega
  • Choose either a canopy or a sealed and pressurized cab equipped with air conditioning, adjustable wrist rests, and a suspension seat option to help keep you working comfortably all day long.

EASY TO OPERATE
  • Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.

STICK STEER TRAVEL MODE
  • Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A COMPACT DESIGN
  • Strong lift and dig performance helps you get the job done faster. The retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer blade float features allow for easy clean up.

SAFETY ON THE JOB SITE
  • Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt with optional seat belt reminder system are just a couple of the safety features we’ve built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME
  • Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab lets you reach additional service areas when needed.

LOWER OPERATING COSTS
  • Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.

SUSTAINABILITY
  • The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  • Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
  • The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
  • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)


Blade
Height225 mm
Width*990 mm
Note*Expanded – 1300 mm (51 in)

Certification - Cab and Canopy
Tip Over Protective Structure (TOPS)ISO 12117:1997
Roll Over Protective Structure (ROPS)ISO 12117-2:2008
Top GuardISO 10262:1998 (Level I)

Dimensions - Long Stick
Dig Depth2570 mm
Stick Length1160 mm
Vertical Wall1940 mm
Maximum Reach - Ground Level3960 mm
Track Width - Expanded1300 mm
O/A Undercarriage Length1590 mm
O/A Shipping Height2300 mm
Maximum Blade Height270 mm
Overall Shipping Length*3710 mm
Tail Swing995 mm
Track Width - Retracted990 mm
Maximum Blade Depth265 mm
Boom In Reach1420 mm
Maximum Dump Clearance2640 mm
Boom Swing - Right50 °
Maximum Reach4030 mm
Boom Swing - Left65 °
Maximum Dig Height3620 mm
Swing Bearing - Height442 mm
Boom Height - Shipping Position1020 mm
Minimum Ground Clearance Below Undercarriage150 mm
Note*Overall Shipping Length depends on blade position during shipment.
Track Belt/Shoe Width230 mm

Dimensions - Standard Stick
Boom In Reach1420 mm
Maximum Reach - Ground Level3800 mm
Maximum Blade Depth265 mm
Stick Length960 mm
Vertical Wall1850 mm
Boom Height - Shipping Position1070 mm
Track Width - Expanded1300 mm
Overall Shipping Length*3720 mm
Maximum Blade Height270 mm
Boom Swing - Right50 °
Note*Overall Shipping Length depends on blade position during shipment.
Minimum Ground Clearance Below Undercarriage150 mm
Maximum Reach3870 mm
Swing Bearing - Height442 mm
Maximum Dig Height3550 mm
Track Belt/Shoe Width230 mm
Tail Swing995 mm
Boom Swing - Left65 °
Track Width - Retracted990 mm
O/A Undercarriage Length1590 mm
Maximum Dump Clearance2560 mm
O/A Shipping Height2300 mm
Dig Depth2370 mm

Engine
Net Power15.7 kW
Engine ModelC1.1
Stroke81 mm
Bore77 mm
Note (2)Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.
EmissionsMeets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Displacement1.1 l
Note (1)Engine power is tested per ISO 14396:2002.
NoteNet power is tested per ISO 9249:2007 and 80/1269/EEC.
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC15.7 kW
Gross Power - SAE J1995:201416.1 kW

Hydraulic System
Operating Pressure - Equipment245 bar
Auxiliary Circuit - Secondary - Flow14 l/min
Digging Force - Bucket19.6 kN
Operating Pressure - Travel245 bar
Digging Force - Stick - Long9.8 kN
Auxiliary Circuit - Secondary - Pressure245 bar
Operating Pressure - Swing147 bar
Auxiliary Circuit - Primary - Flow33 l/min
Pump Flow at 2,400 rpm66 l/min
TypeLoad Sensing Hydraulics with Variable Displacement Piston Pump
Digging Force - Stick - Standard11.3 kN
Auxiliary Circuit - Primary - Pressure245 bar

Service Refill Capacities
Cooling System3.9 l
Hydraulic Tank18 l
Engine Oil4.4 l
Fuel Tank26 l
Hydraulic System26 l

Sound
Operator Sound Pressure (ISO 6396:2008)73 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)93 dB(A)
NoteEuropean Union Directive “2000/14/EC”

Sustainability
Recyclability95%

Swing System
Machine Swing Speed9.8 r/min

Travel System
Travel Speed - Low2.9 km/h
Maximum Traction Force - High Speed11.9 kN
Travel Speed - High4.4 km/h
Ground Pressure - Maximum Weight29.6 kPa
Maximum Traction Force - Low Speed18.4 kN
Ground Pressure - Minimum Weight26.8 kPa
Gradeability - Maximum30 degrees

Weight Increase from Minimum Configuration
Steel Tracks50 kg
Long Stick8 kg
Expandable Undercarriage123 kg

Weights
Operating Weight2029 kg
Maximum Operating Weight with Cab**2029 kg
Minimum Operating Weight with Canopy*1725 kg
Maximum Operating Weight with Canopy**1905 kg
Minimum Operating Weight with Cab*1848 kg
Note (2)**Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
Note (1)*Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank.
Note (3)***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
EU: CE Plate Weight with Cab***2000 kg
EU: CE Plate Weight with Canopy***1880 kg

Cat 301.8

Teie otsene kontakt

Lisateabe saamiseks võtke meiega ühendust

Please select your country