Cat 301.6
Mini-Excavators
- Koormust tundev hüdraulika võimaldab lühimaid töötsükleid
- Parima selgusega ületamatu salongimugavus
- Enneolematu juurdepääs hoolduseks ja teeninduseks
- Tugeva konstruktsiooniga kõrge edasimüügiväärtusega
- Maksimaalne materjalikäsitlus väikese ruumivajadusega
- A sealed and pressurized cab equipped with air conditioning, adjustable wrist rests and a suspension seat option help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A COMPACT DESIGN
- Strong lift and dig performance helps you get the job done faster. The retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer float features allow for easy clean up.
SAFETY ON THE JOB SITE
- Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
- Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab lets you reach additional service areas when needed.
LOWER OPERATING COSTS
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
SUSTAINABILITY
- The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)
Blade
Height | 225 mm |
---|---|
Width* | 990 mm |
Note | *Expanded – 1300 mm (51 in) |
Certification - Cab
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
---|---|
Tip Over Protective Structure (TOPS) | ISO 12117:1997 |
Top Guard | ISO 10262:1998 (Level I) |
Dimensions - Long Stick
Dig Depth | 2540 mm |
---|---|
Boom Swing - Left | 65 ° |
Boom Height - Shipping Position | 1040 mm |
Maximum Blade Depth | 260 mm |
Stick Length | 1160 mm |
Track Belt/Shoe Width | 230 mm |
Tail Swing | 995 mm |
Track Width - Expanded | 1300 mm |
Maximum Blade Height | 275 mm |
Boom Swing - Right | 50 ° |
Vertical Wall | 1890 mm |
Maximum Reach | 3960 mm |
Maximum Dump Clearance | 2510 mm |
Maximum Reach - Ground Level | 3890 mm |
Track Width - Retracted | 990 mm |
Boom In Reach | 1450 mm |
Overall Shipping Length* | 3860 mm |
Maximum Dig Height | 3490 mm |
O/A Shipping Height | 2310 mm |
Swing Bearing - Height | 445 mm |
Minimum Ground Clearance Below Undercarriage | 155 mm |
O/A Undercarriage Length | 1460 mm |
Note | *Overall Shipping Length depends on blade position during shipment. |
Dimensions - Standard Stick
Boom Swing - Right | 50 ° |
---|---|
Minimum Ground Clearance Below Undercarriage | 155 mm |
Maximum Reach - Ground Level | 3730 mm |
Maximum Dump Clearance | 2450 mm |
Dig Depth | 2340 mm |
O/A Undercarriage Length | 1460 mm |
Track Width - Expanded | 1300 mm |
Tail Swing | 995 mm |
Overall Shipping Length* | 3620 mm |
Maximum Blade Depth | 260 mm |
Swing Bearing - Height | 445 mm |
Maximum Reach | 3800 mm |
O/A Shipping Height | 2310 mm |
Track Belt/Shoe Width | 230 mm |
Note | *Overall Shipping Length depends on blade position during shipment. |
Track Width - Retracted | 990 mm |
Stick Length | 960 mm |
Boom Height - Shipping Position | 1090 mm |
Maximum Dig Height | 3430 mm |
Vertical Wall | 1800 mm |
Boom Swing - Left | 65 ° |
Boom In Reach | 1460 mm |
Maximum Blade Height | 275 mm |
Engine
Net Power | 15.7 kW |
---|---|
Engine Model | C1.1 |
Bore | 77 mm |
Note (2) | Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. |
Stroke | 81 mm |
Displacement | 1.1 l |
Note (1) | Engine power is tested per ISO 14396:2002. |
Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
Note | Net power is tested per ISO 9249:2007 and 80/1269/EEC. |
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 15.7 kW |
Gross Power - SAE J1995:2014 | 16.1 kW |
Hydraulic System
Auxiliary Circuit - Primary - Flow | 33 l/min |
---|---|
Auxiliary Circuit - Secondary - Pressure | 213 bar |
Auxiliary Circuit - Primary - Pressure | 213 bar |
Auxiliary Circuit - Secondary - Flow | 14 l/min |
Digging Force - Stick - Long | 7.2 kN |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
Operating Pressure - Travel | 213 bar |
Operating Pressure - Equipment | 213 bar |
Operating Pressure - Swing | 103 bar |
Digging Force - Stick - Standard | 8.2 kN |
Digging Force - Bucket | 14.1 kN |
Pump Flow at 2,400 rpm | 66 l/min |
Service Refill Capacities
Cooling System | 3.9 l |
---|---|
Hydraulic Tank | 18 l |
Hydraulic System | 26 l |
Engine Oil | 4.4 l |
Fuel Tank | 22 l |
Sound
Note | European Union Directive “2000/14/EC” |
---|---|
Average Exterior Sound Pressure (ISO 6395:2008) | 93 dB(A) |
Operator Sound Pressure (ISO 6396:2008) | 73 dB(A) |
Sustainability
Recyclability | 95% |
---|
Swing System
Machine Swing Speed | 9.8 r/min |
---|
Travel System
Travel Speed - Low | 2.9 km/h |
---|---|
Maximum Traction Force - Low Speed | 15.9 kN |
Maximum Traction Force - High Speed | 10.2 kN |
Travel Speed - High | 4.4 km/h |
Gradeability - Maximum | 30 degrees |
Ground Pressure - Minimum Weight | 30.5 kPa |
Ground Pressure - Maximum Weight | 34 kPa |
Weight Increase from Minimum Configuration
Steel Tracks | 57 kg |
---|---|
Long Stick | 8 kg |
Expandable Undercarriage | 128 kg |
Weights
Operating Weight | 1958 kg |
---|---|
Note (2) | **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. |
Maximum Operating Weight with Cab** | 1958 kg |
Minimum Operating Weight with Cab* | 1765 kg |
Note (1) | *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank. |
EU: CE Plate Weight*** | 1925 kg |
Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. |